Mon-Sat: 07:00 - 17:00

24h Emergency Service

Get Warranty

Register Your Warranty

Call Today +91 9121539121

Machilipatnam, Andhra Pradesh


Packaged Drinking Water Plants

As people become more health conscious, the demand for bottled water is increasing at a rapid rate. Bottled water provides easy transportability and assured water quality.

With our several years of experience in the Water Treatment Field, we have developed comprehensive, economically viable packages, such that the capital outlay is optimized. Our packages are offered in modules so that they can be upgraded at a later date as the demand increases.

Water as it occurs in nature is very “pure”, and whatever may be the source, always contains impurities either in solution or in suspension. The determination of these impurities makes analysis of water necessary and removal and control of these impurities make water treatment essential.

Reverse Osmosis plants (Floride Removal Filter)

Reverse osmosis (RO) is the most economical method of removing 90% to 99% of all contaminants. The pore structure of RO membranes is much tighter than UF membranes. RO membranes are capable of rejecting practically all particles, bacteria and organics , (including pyrogens). In fact, reverse osmosis technology is used by most leading water bottling plants.

Natural osmosis occurs when solutions with two different concentrations are separated by a semi-permeable membrane. Osmotic pressure drives water through the membrane; the water dilutes the more concentrated solution; and the end result is equilibrium.

In water purification systems, hydraulic pressure is applied to the concentrated solution to counteract the osmotic pressure. Pure water is driven from the concentrated solution and collected downstream of the membrane.Reverse osmosis is highly effective in removing several impurities from water such as total dissolved solids (TDS), turbidity, asbestos, lead and other toxic heavy metals, radium, and many dissolved organics. The process will also remove chlorinated pesticides and most heavier-weight VOCs. Reverse osmosis and activated carbon filtration are complementary processes. Combining them results in the most effective treatment against the broadest range of water impurities and contaminants.


Effectively removes all types of contaminants to some extent (particles, pyrogens, microorganisms, colloids and dissolved inorganics).Requires minimal maintenance.

Water Softners

The softeners are charged with a high capacity polystyrene bead cation exchange resin in sodium form. When hard water passes through this resin column, the hardness forming calcium and magnesium salts are replaced with sodium salts which do not posses any hardness properties. This softening process is continuous until the material is exhausted of sodium salts when it is regenerated with a solution of common salt.

The units are designed on the advanced counter-current principle that ensures consistent good quality treated water.

DM Plant

Demineralization or Deionisation is the process of removing mineral salts from water by using the ion exchange process. With most natural water sources it is possible to use Demineralisation and produce water of a higher quality than conventional distillation.

Fluid Systems Manufacture a Wide range of custom-built softening, Dematerializing plants for industrial process water applications, with inherent design to conserve water, and save costs. They are available in different sizes and materials, manually operated or fully Automatic, & ready to install & are available as standard models or custom built versions for specific needs.

UV Systems

Ultraviolet light deactivates the DNA of bacteria, viruses and other pathogens and destroys their ability to multiply and cause disease. Specifically, UV light causes damage to the nucleic acid of microorganisms by forming covalent bonds between certain adjacent bases in the DNA. The formation of such bonds prevents the DNA to reproduce.

Bottling Unit (Bottle Manufacturing and Filling)

Automatic Rinsing and Automatic Filling,

The machine is of rotary design having five turn tables

To feed bottle from conveyor o rinsing, Rinsing, Filling, Transfer of bottle from filling to Capping, Capping.

The bottles are held on neck only Rinsing is done by jets which are pressurized by pump. A suitable overhead tank of approx. 70Ltr. Over head tank is provided with machine for Continues water for filling. 10 feet (Air Conveyor) feed SS Slat conveyor and 20 feet discharge conveyor fitted with inspection board and Shrink tunnel provided along with machine. A separate cap feeder with storage Capacity of Around 1000 caps with mechanical systems is provided.
15 rinsing head, 15 filling head, 6 capping head
Output: 60 – 64B.P.M. (1000 ml)

Semi‐Automatic Blowing Machine

Supply of Automatic Pet Blowing Machines Capacity 900 – 1100 BPH for Filling Packaged Drinking Water.